Featured in the Tombo Series, brass is characterized by its warm, golden tone and the natural luster of the metal. At WENTZ, its surface receives a highly resistant matte varnish, developed to preserve the finish and protect the material from direct exposure to environmental conditions, reducing its natural oxidation.
IMPORTANT NOTES
As a metal that naturally reacts to the passage of time, maintaining the integrity of this protective coating is essential to preserving the uniformity of its color and finish. Nevertheless, slight changes in color and luster may occur over the years and are part of the material’s natural aging process.
CARE
Avoid impacts, scratches, and friction with rough or sharp objects, as these may damage the varnish coating and expose the brass to oxidation.
Avoid prolonged contact with water, moisture, salt, sea air, perfumes, cosmetics, acidic or alkaline substances, and chemical products. Spilled liquids should be removed immediately, without excessive rubbing.
Do not use steel wool, abrasive sponges, brushes, scouring creams, abrasive powders, bleach, solvents, or chlorine-based products.
Do not use metal polishes or products specifically designed for polishing brass. These products are generally formulated for uncoated metal surfaces and may wear down, stain, or remove the protective varnish applied by WENTZ.
During cleaning, protect the other components of the product, particularly wood, stone, fabrics, leather, and painted surfaces.
MAINTENANCE
The most important aspect of brass maintenance is preserving the integrity of its protective varnish. Therefore, periodic polishing or the application of waxes, oils, or other products to the surface is not necessary.
In coastal regions, environments with high humidity, or areas exposed to higher concentrations of salt, special attention should be given to cleaning and maintenance, as these conditions may accelerate oxidation if any areas of the metal become exposed.
CLEANING
For everyday cleaning, gently remove dust using a clean, soft, dry cloth, preferably microfiber










