Featured in the Fungi Series, textured cast glass draws inspiration from the intricate patterns found on the underside of mushrooms. Its relief transforms the way light passes through the material, creating varying intensities, reflections, and shadows across the surface.
IMPORTANT NOTES
Each glass component undergoes an artisanal manufacturing process, during which the material develops organic textures and bubbles that make every piece unique. Slight variations in texture, thickness, transparency, and bubble distribution are natural characteristics of this process and are not considered manufacturing defects.
CARE
Cast glass is sensitive to impacts, falls, and thermal shock. Always handle the pieces with care, particularly avoiding impacts along the edges and contact with hard surfaces.
Before performing any cleaning or maintenance, disconnect the lighting fixture from the power supply.
Avoid allowing cleaning products to accumulate within the raised textures and natural irregularities of the glass.
MAINTENANCE
Remove dust periodically to prevent residue from accumulating on the surface and within the textured areas of the glass. Cleaning frequency will depend on environmental conditions and the lighting fixture’s exposure to dust, grease, and moisture.
The bubbles, raised textures, and subtle variations present in the glass are inherent characteristics of its artisanal manufacturing process. They do not require correction or maintenance.
If the glass develops cracks, chips, or damage caused by impact, discontinue use of the lighting fixture and contact WENTZ customer support.
In case of breakage, WENTZ offers replacement glass components for the Fungi Series, subject to model availability. Contact our team to identify the product and request the appropriate replacement part.
CLEANING
For everyday cleaning, gently remove dust using a soft duster or a clean, dry, lint-free cloth. On textured areas, a very soft-bristled brush may be used carefully to reach the raised details and remove accumulated dust.
For more thorough cleaning, use a soft white cloth slightly dampened with water and a small amount of mild soap or detergent. Gently wipe the surface without applying excessive pressure.
Then, remove any remaining soap residue using another soft cloth dampened with water only, and dry thoroughly with a clean, soft cloth. Make sure no water or cleaning product residue remains trapped within












