Used in the Tábua (“Board” in Portuguese) Series, Recycled PET Core is an innovative construction solution developed with a lightweight, aerated core made from recycled PET, covered with a 1.5 mm natural wood veneer.
This construction preserves the appearance, feel, and distinctive characteristics of natural wood while using significantly less of this resource compared to an equivalent piece made entirely from solid wood. At the same time, the recycled PET core reduces the weight of the structure and provides greater dimensional stability in response to changes in temperature and humidity.
IMPORTANT NOTES
As the surface is made from genuine wood, each piece retains the natural variations in color and grain characteristic of the wood species used, making every piece unique.
CARE
Despite its recycled PET core, the product features a natural wood surface and should receive the same care as any other natural wood furniture.
Avoid direct and prolonged exposure to sunlight, which may gradually alter the color of the wood. Also avoid prolonged contact with water, moisture, and liquids in general. In case of spills, immediately remove any excess liquid and dry the surface thoroughly.
Avoid leaving objects permanently in the same position for extended periods, especially in areas exposed to light, as differences in exposure may result in variations in surface color.
Use coasters or protective pads beneath glasses, bottles, vases, and objects that may release liquids or moisture. Never place hot pots, serving dishes, kettles, or other hot objects directly on the furniture. Always use appropriate heat-resistant protection.
Avoid impacts, sharp objects, and dragging items directly across the surface, as these may scratch, mark, or damage the wood veneer.
Although the core offers greater stability under changing environmental conditions compared to solid wood, the product should not be exposed to extreme heat or humidity or used outdoors.
CLEANING
For everyday cleaning, remove dust using a clean, soft, dry cloth, preferably microfiber.
For more thorough cleaning, use a soft cloth slightly dampened with water and a small amount of mild soap or detergent. Gently wipe the surface and dry immediately.
Do not apply water or cleaning products directly to the furniture, and avoid excessive moisture, particularly around edges, joints, and connections between components.
Do not use alcohol, solvents, bleach, chlorine-based products, scouring creams, waxes, furniture polish, abrasive sponges, steel wool, or general-purpose chemical cleaners. These products may alter the finish or permanently damage the natural wood surface.
For persistent stains or damage to the finish, contact WENTZ customer support before attempting any cleaning treatment or restoration method.














